1-1/4" Gelenkkopf, Linksgewinde (HD)
£32.00 GBP
Zu Produktinformationen springen
2-teiliges Heavy-Duty-Gelenklager, 1-1/4"-12 (linksgewinde), inklusive Kontermutter.
Diese Gelenkköpfe verfügen über eine spritzgegossene PTFE-verstärkte Nylon-Laufschicht und eignen sich hervorragend für extreme Offroad-Anwendungen wie Längslenker und 4-Link-Aufhängungen.
| Artikelnummer | XML16 |
|---|---|
| Gewindegröße | 1-1/4"–12 UNF |
| Gewinderichtung | Left hand (LH) |
| Bauweise | 2-piece |
| Lagerschicht | Injection-moulded PTFE-reinforced nylon |
| Lieferumfang | Matching jam nut (locknut) |
| Bohrungsdurchmesser (B) | 1" (approx. 25.40 mm) |
| Kopfaußendurchmesser (D) | 2.75" (approx. 69.85 mm) |
| Kugelbreite / Einbaubreite ohne Distanzstücke (W) | 1.375" (approx. 34.93 mm) |
| Gehäusebreite (T) | 1" (approx. 25.40 mm) |
| Bohrungsmitte bis Schaftende (AM) | 4.125" (approx. 104.78 mm) |
| Gewindelänge (CM) | 2.125" (approx. 53.98 mm) |
| Katalog-Schwenkwinkel (α) | 17° (clevis mounted) |
| Statische Radiallast laut Katalog | 76,200 lbf (approx. 339.0 kN) |
| Ungefähres Gelenkgewicht | 2.41 lb (approx. 1093 g) |
| Gehäusematerial | Heat-treated 4130 chromoly steel |
| Gehäuseoberfläche | Hard chrome plated |
| Kugelmaterial | Heat-treated 52100 bearing steel |
| Kugeloberfläche | Precision ground, hard chrome plated |
| Schmierung | Self-lubricating |
High misalignment spacers can reduce the 1" bore to suit M16 or 3/4" bolts. With the appropriate spacer pair, the assembled mounting width is 2-5/8" (66.7 mm). The mounting width and bolt size depend on the spacers selected.
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.