Rótula Heim de 1-1/4" rosca derecha (HD)
£32.00 GBP
Ir directamente a la información del producto
Rótula Heim de alta resistencia de 1-1/4"-12 y 2 piezas, suministrada con contratuerca.
Estos extremos de varilla están hechos de nailon reforzado con PTFE moldeado por inyección y son muy adecuados para aplicaciones todoterreno extremas, como brazos de arrastre y configuraciones de 4 eslabones.
| Referencia | XMR16 |
|---|---|
| Tamaño de rosca | 1-1/4"–12 UNF |
| Sentido de rosca | Right hand (RH) |
| Construcción | 2-piece |
| Revestimiento del cojinete | Injection-moulded PTFE-reinforced nylon |
| Incluye | Matching jam nut (locknut) |
| Diámetro del orificio (B) | 1" (approx. 25.40 mm) |
| Diámetro exterior de la cabeza (D) | 2.75" (approx. 69.85 mm) |
| Ancho de bola / montaje sin separadores (W) | 1.375" (approx. 34.93 mm) |
| Ancho de carcasa (T) | 1" (approx. 25.40 mm) |
| Centro del orificio a extremo del vástago (AM) | 4.125" (approx. 104.78 mm) |
| Longitud roscada (CM) | 2.125" (approx. 53.98 mm) |
| Ángulo de desalineación de catálogo (α) | 17° (clevis mounted) |
| Carga radial estática de catálogo | 76,200 lbf (approx. 339.0 kN) |
| Peso aproximado de la rótula | 2.41 lb (approx. 1093 g) |
| Material de carcasa | Heat-treated 4130 chromoly steel |
| Acabado de carcasa | Hard chrome plated |
| Material de bola | Heat-treated 52100 bearing steel |
| Acabado de bola | Precision ground, hard chrome plated |
| Lubricación | Self-lubricating |
High misalignment spacers can reduce the 1" bore to suit M16 or 3/4" bolts. With the appropriate spacer pair, the assembled mounting width is 2-5/8" (66.7 mm). The mounting width and bolt size depend on the spacers selected.
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.