Rotule uniball 1-1/4" filetée à droite (HD)
£32.00 GBP
Passer aux informations sur le produit
Rotule Heim RH 1-1/4"-12 robuste en 2 pièces, fournie avec contre-écrou.
Ces embouts à rotule sont constitués de nylon renforcé de PTFE moulé par injection ; ils sont parfaitement adaptés aux applications tout-terrain extrêmes telles que les bras de suspension (trailing arms) et les montages à 4 bras (4-link).
| Référence | XMR16 |
|---|---|
| Dimension du filetage | 1-1/4"–12 UNF |
| Sens du filetage | Right hand (RH) |
| Construction | 2-piece |
| Revêtement du palier | Injection-moulded PTFE-reinforced nylon |
| Fourni avec | Matching jam nut (locknut) |
| Diamètre de l’alésage (B) | 1" (approx. 25.40 mm) |
| Diamètre extérieur de la tête (D) | 2.75" (approx. 69.85 mm) |
| Largeur de bille / montage sans entretoises (W) | 1.375" (approx. 34.93 mm) |
| Largeur du corps (T) | 1" (approx. 25.40 mm) |
| Centre de l’alésage à extrémité de tige (AM) | 4.125" (approx. 104.78 mm) |
| Longueur filetée (CM) | 2.125" (approx. 53.98 mm) |
| Angle de désalignement du catalogue (α) | 17° (clevis mounted) |
| Charge radiale statique du catalogue | 76,200 lbf (approx. 339.0 kN) |
| Poids approximatif de la rotule | 2.41 lb (approx. 1093 g) |
| Matériau du corps | Heat-treated 4130 chromoly steel |
| Finition du corps | Hard chrome plated |
| Matériau de la bille | Heat-treated 52100 bearing steel |
| Finition de la bille | Precision ground, hard chrome plated |
| Lubrification | Self-lubricating |
High misalignment spacers can reduce the 1" bore to suit M16 or 3/4" bolts. With the appropriate spacer pair, the assembled mounting width is 2-5/8" (66.7 mm). The mounting width and bolt size depend on the spacers selected.
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.