Snodo sferico 1-1/4" filettatura sinistrorsa (HD)
£32.00 GBP
Passa alle informazioni sul prodotto
Snodo sferico LH 1-1/4"-12 Heavy Duty a 2 pezzi, fornito con controdado.
Queste testine sono realizzate in nylon rinforzato con PTFE stampato a iniezione e sono particolarmente adatte per applicazioni fuoristrada estreme, come bracci oscillanti e configurazioni a 4 link.
| Codice articolo | XML16 |
|---|---|
| Dimensione filettatura | 1-1/4"–12 UNF |
| Direzione filettatura | Left hand (LH) |
| Costruzione | 2-piece |
| Rivestimento del cuscinetto | Injection-moulded PTFE-reinforced nylon |
| Fornito con | Matching jam nut (locknut) |
| Diametro del foro (B) | 1" (approx. 25.40 mm) |
| Diametro esterno testa (D) | 2.75" (approx. 69.85 mm) |
| Larghezza sfera / montaggio senza distanziali (W) | 1.375" (approx. 34.93 mm) |
| Larghezza corpo (T) | 1" (approx. 25.40 mm) |
| Centro foro a estremità gambo (AM) | 4.125" (approx. 104.78 mm) |
| Lunghezza filettata (CM) | 2.125" (approx. 53.98 mm) |
| Angolo di disallineamento da catalogo (α) | 17° (clevis mounted) |
| Carico radiale statico da catalogo | 76,200 lbf (approx. 339.0 kN) |
| Peso approssimativo del giunto | 2.41 lb (approx. 1093 g) |
| Materiale corpo | Heat-treated 4130 chromoly steel |
| Finitura corpo | Hard chrome plated |
| Materiale sfera | Heat-treated 52100 bearing steel |
| Finitura sfera | Precision ground, hard chrome plated |
| Lubrificazione | Self-lubricating |
High misalignment spacers can reduce the 1" bore to suit M16 or 3/4" bolts. With the appropriate spacer pair, the assembled mounting width is 2-5/8" (66.7 mm). The mounting width and bolt size depend on the spacers selected.
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.