1-1/4" Heim-gewricht rechtsdraaiend (HD)
£32.00 GBP
Ga direct naar de productinformatie
2-delige Heavy Duty RH 1-1/4"-12 Heim-joint, geleverd inclusief contramoer.
Deze stangkogels zijn gemaakt van spuitgegoten, met PTFE versterkt nylon en zijn zeer geschikt voor extreme off-road toepassingen zoals draagarmen en 4-link systemen.
| Artikelnummer | XMR16 |
|---|---|
| Schroefdraadmaat | 1-1/4"–12 UNF |
| Schroefdraadrichting | Right hand (RH) |
| Constructie | 2-piece |
| Lagerbekleding | Injection-moulded PTFE-reinforced nylon |
| Geleverd met | Matching jam nut (locknut) |
| Boringdiameter (B) | 1" (approx. 25.40 mm) |
| Buitendiameter kop (D) | 2.75" (approx. 69.85 mm) |
| Kogelbreedte / montagebreedte zonder afstandhouders (W) | 1.375" (approx. 34.93 mm) |
| Huisbreedte (T) | 1" (approx. 25.40 mm) |
| Boringcentrum tot schachteinde (AM) | 4.125" (approx. 104.78 mm) |
| Schroefdraadlengte (CM) | 2.125" (approx. 53.98 mm) |
| Catalogus-kantelhoek (α) | 17° (clevis mounted) |
| Statische radiale catalogusbelasting | 76,200 lbf (approx. 339.0 kN) |
| Geschat gewrichtsgewicht | 2.41 lb (approx. 1093 g) |
| Materiaal huis | Heat-treated 4130 chromoly steel |
| Afwerking huis | Hard chrome plated |
| Materiaal kogel | Heat-treated 52100 bearing steel |
| Afwerking kogel | Precision ground, hard chrome plated |
| Smering | Self-lubricating |
High misalignment spacers can reduce the 1" bore to suit M16 or 3/4" bolts. With the appropriate spacer pair, the assembled mounting width is 2-5/8" (66.7 mm). The mounting width and bolt size depend on the spacers selected.
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.