1/2" Heim-gewricht RV (HD)
£8.50 GBP
Ga direct naar de productinformatie
2-delige Heavy Duty RH 1/2" - 20 kogelgewricht, geleverd met contramoer.
Deze stangkogels zijn gemaakt van spuitgegoten, met PTFE versterkt nylon en zijn zeer geschikt voor stabilisatorstangen en op maat gemaakte koppelstangen.
| Artikelnummer | XMR8 |
|---|---|
| Schroefdraadmaat | 1/2"–20 UNF |
| Schroefdraadrichting | Right hand (RH) |
| Constructie | 2-piece |
| Lagerbekleding | Injection-moulded PTFE-reinforced nylon |
| Geleverd met | Matching jam nut (locknut) |
| Boringdiameter (B) | 0.5" (approx. 12.70 mm) |
| Buitendiameter kop (D) | 1.312" (approx. 33.32 mm) |
| Kogelbreedte / montagebreedte zonder afstandhouders (W) | 0.625" (approx. 15.88 mm) |
| Huisbreedte (T) | 0.5" (approx. 12.70 mm) |
| Boringcentrum tot schachteinde (AM) | 2.438" (approx. 61.93 mm) |
| Schroefdraadlengte (CM) | 1.5" (approx. 38.10 mm) |
| Catalogus-kantelhoek (α) | 12° (clevis mounted) |
| Statische radiale catalogusbelasting | 16,238 lbf (approx. 72.2 kN) |
| Geschat gewrichtsgewicht | 0.24 lb (approx. 109 g) |
| Materiaal huis | Heat-treated 4130 chromoly steel |
| Afwerking huis | Hard chrome plated |
| Materiaal kogel | Heat-treated 52100 bearing steel |
| Afwerking kogel | Precision ground, hard chrome plated |
| Smering | Self-lubricating |
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.