5/8" Heim-gewricht rechtsdraaiend (HD)
£10.00 GBP
Ga direct naar de productinformatie
2-delige Heavy Duty RH 5/8"-18 kogelgewricht (Heim Joint), geleverd inclusief contramoer.
Deze stangkogels zijn gemaakt van spuitgegoten, met PTFE versterkt nylon en zijn uitermate geschikt voor extreme off-road toepassingen zoals Panhard-stangen voor de Suzuki Jimny, trekstangen voor de Can-Am en stabilisatorstangen.
| Artikelnummer | XMR10 |
|---|---|
| Schroefdraadmaat | 5/8"–18 UNF |
| Schroefdraadrichting | Right hand (RH) |
| Constructie | 2-piece |
| Lagerbekleding | Injection-moulded PTFE-reinforced nylon |
| Geleverd met | Matching jam nut (locknut) |
| Boringdiameter (B) | 0.625" (approx. 15.88 mm) |
| Buitendiameter kop (D) | 1.5" (approx. 38.10 mm) |
| Kogelbreedte / montagebreedte zonder afstandhouders (W) | 0.75" (approx. 19.05 mm) |
| Huisbreedte (T) | 0.562" (approx. 14.27 mm) |
| Boringcentrum tot schachteinde (AM) | 2.625" (approx. 66.68 mm) |
| Schroefdraadlengte (CM) | 1.625" (approx. 41.28 mm) |
| Catalogus-kantelhoek (α) | 16° (clevis mounted) |
| Statische radiale catalogusbelasting | 17,955 lbf (approx. 79.9 kN) |
| Geschat gewrichtsgewicht | 0.36 lb (approx. 163 g) |
| Materiaal huis | Heat-treated 4130 chromoly steel |
| Afwerking huis | Hard chrome plated |
| Materiaal kogel | Heat-treated 52100 bearing steel |
| Afwerking kogel | Precision ground, hard chrome plated |
| Smering | Self-lubricating |
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.