1/2" Heim Joint RH (HD)
£8.50 GBP
Skip to product information
Heavy-duty right-hand threaded Heim joint (spherical rod end), supplied with a matching jam nut.
These rod ends are injection moulded PTFE reinforced Nylon, they are well suited for sway bar links and custom linkage rods.
| Part number | XMR8 |
|---|---|
| Thread size | 1/2"–20 UNF |
| Thread direction | Right hand (RH) |
| Construction | 2-piece |
| Bearing lining | Injection-moulded PTFE-reinforced nylon |
| Supplied with | Matching jam nut (locknut) |
| Bore diameter (B) | 0.5" (approx. 12.70 mm) |
| Head outside diameter (D) | 1.312" (approx. 33.32 mm) |
| Ball width / bare mounting width (W) | 0.625" (approx. 15.88 mm) |
| Housing width (T) | 0.5" (approx. 12.70 mm) |
| Bore centre to shank end (AM) | 2.438" (approx. 61.93 mm) |
| Threaded shank length (CM) | 1.5" (approx. 38.10 mm) |
| Catalogue misalignment angle (α) | 12° (clevis mounted) |
| Catalogue static radial load | 16,238 lbf (approx. 72.2 kN) |
| Approximate joint weight | 0.24 lb (approx. 109 g) |
| Body material | Heat-treated 4130 chromoly steel |
| Body finish | Hard chrome plated |
| Ball material | Heat-treated 52100 bearing steel |
| Ball finish | Precision ground, hard chrome plated |
| Lubrication | Self-lubricating |
Sizing: Thread size refers to the threaded shank; check the joint bore and spacer requirements separately. RH and LH describe the thread direction.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.
Dimensions shown are nominal catalogue values. Bore and mounting width are for the bare joint; high misalignment spacers alter the bolt size, mounting width and available articulation. The static radial load is a manufacturer catalogue rating, not a working load limit.