3/4" Bush Type Joint (Panhard) LH
M14
£20.00 GBP
Skip to product information
View full-size dimension guide
3/4" bush-style joint designed for panhard bar setups.
Mounting width of 44.5mm aligns with chassis and axle mount points on Defender, Discovery 1 & 2, and Range Rover Classic platforms.
The only difference is the bolt diameters so double check this before ordering or ask us for advice.
| Thread size (N) | 3/4"-16 UNF |
|---|---|
| Thread direction | Left hand (LH) |
| Centre sleeve / bolt-hole option (B) | M14 or M16 - select required centre |
| Housing outside diameter (A) | 50.80 mm (2.000") |
| Bore centre to threaded end (C) | 74.93 mm (2.950") |
| Threaded shank length (D) | 38.10 mm (1.500") |
| Mounting width across sleeve faces (W) | 44.45 mm nominal (1.750"), commonly rounded to 44.5 mm |
| Overall length (calculated) | Approximately 100.33 mm (3.950"), excluding jam nut |
Dimensions are nominal supplier catalogue values. The 3/4" size refers to the joint thread, not the mounting bolt.
DOR centre options are supplied for M14 or M16 bolts. The standard catalogue bore is 5/8" (15.875 mm); this is distinct from the DOR centre options. M14/M16 denotes bolt fitment, not an exact measured clearance bore.
Overall length is calculated as C + A/2. The sketch is schematic and not to scale.
DOR centre options are supplied for M14 or M16 bolts. The standard catalogue bore is 5/8" (15.875 mm); this is distinct from the DOR centre options. M14/M16 denotes bolt fitment, not an exact measured clearance bore.
Overall length is calculated as C + A/2. The sketch is schematic and not to scale.
View full-size dimension guide